Published at Saturday, 14 October 2017 by Calantha in Garage Floor, with total 17 drawings.
Rolled garage floors are the lowest cost and easiest type of garage floor to install. These floors are simply rolled out and the seems are either overlapped or butted together. They do not need to be glued down and the seems do not need to be taped. If you are interested in securing a rolled rubber garage floor, there are seeming tapes and floor adhesives available but they are certainly not required. Rolled floors are available in widths from 7.5 to 10 feet wide and various lengths. Custom lengths are also available if you are unable to locate the right size roll for your garage. Rolled garage floors are available in 4 patterns including diamond tread, levant, coin and ribbed. Various thicknesses are also available ranging from 55 mil to 85 mil and in 6 different colors.
Giving your garage floor a deep and thorough cleaning will help prepare it for its new paint job. Scrub your floor with a shop brush and soap and water to remove all the oil, grease and dirt. You must do this before beginning any steps to applying your new garage floor paint. If you have some old, deep oil stains try removing them with chemicals and abrasive scrub pads. Before you apply any paint or coating your floor must be completely free of all grime, dirt and grease. You can also spray your floor with prep cleaner and then rinsing it to better prepare and your floor for the new paint application.
You can now begin to apply your new garage floor paint once you have properly cleaned your flooring. You may have to mix some coating solutions together depending on the paint or coat you choose to apply to your garage flooring. Once the mix is ready, apply the paint or coat thoroughly onto your floor with a small bristle shop brush or floor painting type brush. If you want to, you can even add paint chips to your coat or paint for a more unique and outgoing paint job. You just sprinkle the chips around the floor or in the locations you want them. Once you do this, repeat the paint or coat application to make sure your floor is completely covered.