Published at Friday, 27 October 2017 by Belda in Garage Floor, with total 37 photographs.
Giving your garage floor a deep and thorough cleaning will help prepare it for its new paint job. Scrub your floor with a shop brush and soap and water to remove all the oil, grease and dirt. You must do this before beginning any steps to applying your new garage floor paint. If you have some old, deep oil stains try removing them with chemicals and abrasive scrub pads. Before you apply any paint or coating your floor must be completely free of all grime, dirt and grease. You can also spray your floor with prep cleaner and then rinsing it to better prepare and your floor for the new paint application.
Finally, garage floor tiles are an excellent option for a custom look. There are more styles and colors available than epoxy paint or floor mats, and the tiles themselves interlock for easy installation. They are more expensive and only slightly more difficult to install than floor mats, and range in price from $3 - $6 per square foot. The tiles come in wood, rubber or polyvinyl. Wooden garage floor tiles have a plastic interlocking system underneath them and provide a cushioned surface for standing, but they are noisier to walk or drive on than polyvinyl or rubber tiles. Rubber and polyvinyl garage floor tiles usually interlock themselves, without a plastic frame underneath, and are durable, withstanding up to 50,000 lbs of pressure. They absorb sound, do not damage easily, and maintain their good looks for years. All three types of garage floor tiles are porous enough to allow liquid to drain through them without allowing small pieces of hardware to fall through, making them an excellent choice for flooring if you regularly hose down your garage floor.
Garage floor mats are economical, improve the look of the floor and are quick and easy to install. Costing less than $2 a square foot on average, they are the fastest of all three options to put down. They can be purchased online, as a roll or a complete mat, and installation is as simple as cutting them to fit the garage as needed, and then unrolling. They create a seamless look in a smaller garage or can be used only under the car in a larger garage. Manufactured with raised patterns to reduce slipping, they are not a good solution for use on unsealed cement floors, as the ground moisture seeping upwards through the pores of the concrete will be trapped under the non-porous polyvinyl of the mat, causing mold and bacteria to flourish and eroding the floor over time.