Published at Saturday, 14 October 2017 by Aveline in Garage Floor, with total 18 photographs.
There are more types of garage floor coatings. Some of them are: epoxy garage floor coating, vinyl garage floor coating, interlocking garage floor coating, roll over floor coating and so on. The most common and one of the best garage floor coatings is the epoxy garage floor coating. It isnt very easy to install, you have to watch out for a few things before you install it, but if you do it right it will last for a very long time and it will protect the concrete very well. Moreover, it will give your garage a gorgeous look. So, if you want your garage to look good, the first thing to do is install a garage floor coating.
Garage floor mats are economical, improve the look of the floor and are quick and easy to install. Costing less than $2 a square foot on average, they are the fastest of all three options to put down. They can be purchased online, as a roll or a complete mat, and installation is as simple as cutting them to fit the garage as needed, and then unrolling. They create a seamless look in a smaller garage or can be used only under the car in a larger garage. Manufactured with raised patterns to reduce slipping, they are not a good solution for use on unsealed cement floors, as the ground moisture seeping upwards through the pores of the concrete will be trapped under the non-porous polyvinyl of the mat, causing mold and bacteria to flourish and eroding the floor over time.
In each of the examples above it is important to know the width and length of your garage. Many of the garage floors available come in various patterns and are generally rolled out from the back of the garage to the front. By doing this, the seem will run along the length of the garage. To determine the width of the rolls you will need you simply take the width of your garage and divide it by the various widths of flooring available. The most common widths of rolled garage flooring are 7.5, 8, 9 and 10. If your garage is 22 wide then the best choice would be 3 rolls of the 7.5 width flooring. That would give you the least amount of waste when you install your floor. Three rolls at 7.5 wide would cover an area 22.5 wide providing only 6 inches of waste.